3
Carrier use for: Back Carry Position, Assisted
1.
Hold the carrier upside down by the
Waist Belt
, with
the front of the carrier body facing your body (behind
you) and the
Shoulder Straps
hanging down.
2.
Place the
Waist Belt
flat against your body at your
natural waist (where your belly button is). Fasten the
Waist Belt Buckle
in front of you. You will hear a
“click” when the buckle is secure. Pull the
Waist Belt
Strap
to tighten.
* IMPORTANT! Always make sure the waist belt fits securely against
your body at all times. There should NOT be a gap between the
Waist
Belt and your body.
* Make sure to slide the buckle Webbing through the Safety Elastic loop.
* Using the
Safety Elastic - The Safety Elastic is an extra precaution,
intended to keep your baby safe in the event that the
Waist Belt
Buckle comes undone while you are carrying baby. To use, follow
these simple steps:
1. Fasten
Waist Belt Buckle, making sure Safety Elastic is on top of
the buckle.
2. Stretch the
Safety Elastic to the right and pull the Waist Belt Strap
through the elastic loop.
3. Tuck the
Safety Elastic behind the Waist Belt Buckle.
IMPORTANT! Baby must be able to fully sit up on his or her own before being worn in the Back Carry Position.
STOP! First time users, DO NOT attempt to use the carrier in the Back Carry Position without the assistance of a second
adult. We highly recommend always using the assistance of a second person.
Either you or your partner should be supporting baby securely throughout the process of putting baby in the carrier, until
all the buckles and straps are properly fastened and adjusted.
Your baby should always be comfortable. If your baby is fussy it could be an indication that he or she is not properly
positioned. If this occurs, take your baby out immediately and adjust.
When using this carrier in the Back Carry Position, you should fit it to the user before placing the baby in the carrier.
NOTE: The carrier parts in bold can be found on the carrier illustrations.
*
*
*
*
*
11.
3.
Once the
Waist Belt
is properly fitted, lean forward
slightly and have your partner lift baby up and place
them on your back. Their legs should wrap around
your waist.
4.
With your hands supporting baby, have your partner
pull the carrier up over baby’s back. While your
partner supports baby, pull the
Shoulder Straps
over
your shoulders to the front and stand up straight.
* Either you or your partner should be supporting baby securely
throughout the process of putting baby in the carrier, until all the
buckles and straps are properly fastened and adjusted.
5.
Buckle the
Back/Chest Strap
. You will hear a “click”
when the buckle is secure.
Pull the
Back/Chest Strap Adjuster
to tighten.
12.
