Assembling Procedures
Step 1
Step 2
Step 3
Front Side
Back Side
E. Footrest
Check that you have all the parts for this model BEFORE assembling your product.
No tools required.
Parts List
A. 2 front wheels
D. Baby walker frame
B. 2 rear wheels
C. 6 safe rubbers
G. Electronic play tray
F. Toy set
•
Before using, check that the product and all of its components have not been
damaged during transportation. Check regularly that the product is not broken
or damaged. If the product is broken or damaged, keep out of reach of children.
•
The product must only be assembled by an adult. For the correct assembly of
the product, please refer to the following instructions.
STAIR HAZARD: Avoid serious injury or death.
Block stairs/step securely before using walker .
•
Use only on flat surfaces free of objects which could
cause the
walker to tip
over.
•
Never leave child unattended. Always keep child in view while in walker.
The child will be able to reach further and move rapidly
when in the walking frame.
Prevent access to stairs, steps and uneven surfaces,
slopes or unstable floors, swimming pools or other sources of water.
•
To avoid burns, keep the child away from hot liquids, ranges, radiators, space heaters,
fireplaces, etc.
•
Prevent collisions with glass in doors, windows and furniture.
•
Do not use the baby walking frame if any components are broken or missing.
•
This baby walking frame should be used only for short periods of time(e.g.20mins). .
•
This baby walking frame is intended to be used by children who can sit unaided,
approximately from 6 months. It is not intended for children weighing more than 25LBS.
•
Do not use replacement parts other than those approved by the manufacturer or
distributor.
•
Do not use until baby can sit up by itself.
Read the instructions carefully before use and keep them for future reference.
The child may be hurt if you do not follow these instructions.
Before using, remove and dispose of any plastic bags and other packaging(e. g
fasteners, fixing ties, etc.) and keep them out of reach of children.
•
Clean (friction components) regularly to maintain stopping performance.
2. Fix the rear fix wheels in the appropriate housings. Ensure that the wheels are firmly pushed all the way
into the housing on the down base of the walker.
3. Fix the safe rubbers in the appropriate housings. Ensure that the safe rubbers are firmly pushed all the
way into the housing on the down base of the walker.
1. Turn the baby walker frame upside down. Fix the wheels in the appropriate housings. Ensure that the
wheels are firmly pushed all the way into the housing on the down base of the walker.
