1
WARNINGS
TO BE USED WITH A LAP-SASH/LAP ONLY SEAT BELT IN THE FRONT/BACK OF MOST CARS WITH FORWARD-FACING SEATS.
For a vehicle without a fixed parcel shelf an extension strap(s) may be needed. If so ring (02) 4728 8090
for nearest supply location. This restraint must be attached to a child restraint anchorage point in the car.
Refer to car owner’s handbook for location of anchorage points. Refer to a child restraint fitting station if
no car anchorage points are in the motor vehicle. Before installation please read the whole instructions
carefully on installation and if in doubt about the method of installation please consult Infa Products or
a child restraint fitting station authorised by the relevant transport authority. In New Zealand, consult the
agent for the vehicle.
Connect and use the restraint exactly as shown in the instructions. Fit the restraint firmly to the car seat.
Fit the harness firmly to the child. A loose restraint or harness is dangerous. Supervision of children is
needed because they may be able to undo buckles.
Repairs must only be done by the manufacturer or agent. Do not alter or modify this restraint. Do not
allow the restraint to come into contact with polishes, oils, bleach and other chemicals. Destroy the
restraint if it has been in a severe crash, even if no damage is visible. Seat belt extenders should not be
used if the seat belt is not long enough to secure the child restraint.
CARE AND MAINTENANCE
Regular care of the restraint will ensure safety of your child.
(A) Check the webbing for fraying.
(B) Check that the buckle clicks and is not sluggish or sticky in operation.
(C) Ensure there are no cracks in moulding or the plastic moulding.
(D) Check the harness adjuster is operating and is clamping the webbing.
IMPORTANT: Care must be taken that food, sticky liquids (eg fruit juice, milk formulas, etc) does not get inside
your harness buckle as it may become sluggish. If you do not hear an audible click when engaging the buckle it
may mean it is becoming sluggish. Immediately contact Infa Products so that it can be cleaned and checked to
ensure it is operating properly.
Index and Warnings ..........................................................................................................................Page 1
How to install anchorage fittings .....................................................................................................Page 2
How to install infant position (0 - 9 kg) ..........................................................................................Page 3
How to use for infant position (0 - 9 kg) .........................................................................................Page 4
How to install child position (8 - 18 kg) ...........................................................................................Page 5
How to use for child position (8 - 18 kg) .........................................................................................Page 6
Care of restraint ...............................................................................................................................Page 7
Contents
Australian Service Agent
INFA SECURE PTY LTD
P.O. Box 487, Emu Plains
NSW 2750
Service No: 02 4728 8090
eXceed EHP+
#CS35 Turn-A-Tot
(Rearward Facing)
To see why excellent results have
been achieved with Infa-Securé child
restraints, visit
#CS55C
Comfi-Cruiser
#CS54 Vario-Max
#CS56 Travel-Max
For more information, products & give-aways visit
www.infa-secure.com.au
www.infa-secure.com.au
NEW MODEL
