iNeXT TV3s, Быстрый старт

Страница: 4 / 11

7 ENGLISH 6 inext TV3s - Quick Start Guide
Remote Control
SET
88
99
10 10
12 12
11 11
13 13
14 14
11
22
44
66
77
55
33
No. Button Function
1 Power Press to wake up or enter standby mode.
2 Setup Press to enter the setup menu.
3 Favorite Customizable App shortcut.
4 Home Press to enter the home screen.
5 OK Press OK button to confirm the action.
6 Menu Press to open options menu.
7 Mute Press to turn the sound on/off.
8 TV Control Programmable Buttons to controll TV.
9 VOL+/- Press to increase/decrease the volume.
10 Return Press to return to the previous screen while navigat-
ing menus.
11 Navigation
buttons
Press the arrow buttons to select menu options.
12 Info Press to open additional information panel.
13 Numeric buttons Press to enter chapter numbers or numeric input
when changing settings.
14 Del Delete symbol in input field.
1. To enter programming mode press and hold the white «POWER» button in the
«TV CONTROL» section. It’ll start flashing rapidly, keep it pressed until it stops
flashing.
2. Select one of the learning buttons on the inext remote that you want to teach,
press it once and release, the indicator on the «POWER» button will flash, now
the remote is ready to receive the IR signal for learning.
3. With the IR diodes of the two remotes aligned at a distance of approximately
1-2 cm click the button you want to transfer on the TV remote. If the command
has been accepted, the indicator will blink three times and will light up continu-
ously, this means the command has been recorded.
4. Repeat steps 2-3 for all the buttons you wish to program.
5. When you are finished and want to exit the programming mode, press the OK
button or just wait 10 seconds, the remote will exit the programming mode.
Teaching buttons of the «TV Control» section