4.1.1
Toolbar and menu
The toolbar is used to quickly access the most used functionality of Inertia Studio. This section
describes the default buttons of the toolbar, from left to right (see Figure 7).
Figure 7: Inertia Studio menu and toolbar
•
Connect / Disconnect
The
Connect / Disconnect
button can be used to quickly connect to, or disconnect from an
Inertia device. The drop-down menu associated with this button opens a list for selecting
the target nodes. See Section 4.2 for more information.
•
Record / Stop
When connected to a device, the
Record / Stop
button can be used to quickly start and
stop logging/recording to file (see Section 4.3). If timed recording is enabled, a small clock
overlay is shown on the icon. The drop-down menu associated with this button offers rapid
access to the
Logging Configuration
window (see Section 4.3). The user can also quickly set
the duration of the recording using time-presets.
•
Pause / Resume
The
Pause / Resume
button is enabled during recording. It can be used to pause and resume
the recording.
•
Sensor Settings
The
Sensor Settings
button opens the
Sensor Settings
window (see Section 4.8).
•
Preferences
The
Preferences
button opens the
Preferences
window (see Section 4.11.3).
•
Hide / Show
The
Hide / Show
button toggles between hiding and showing the data in the plots. The
drop-down menu associated with this button opens a list for selecting the target nodes for
which the data is hidden or shown. An small sign (i.e. red cross or yellow triangle) on the
icon indicates that some data is hidden. This button does not influence the logging.
•
Clear (F5)
The
Clear
button, or F5, clears the plots, legend and node lists. This button does not influ-
ence the logging.
•
Layout
The
Layout
button opens the
Layout Wizard
(see Section 4.11.1).
Page 11 of 60
