Inepro V2, Техническое руководство

Страница: 23 / 47

LEDs (Light Emitting Diodes)
Version 2.1.1 - 15
Reader Status Display
All Waiting Off
Non-Wiegand
Card presented to reader, but no reaction from
server Contant on/off pattern
(0.5 sec. / 0.5 sec.)
Wiegand
Card presented to reader, but no reaction from
server
Contant on/off pattern
(0.5 sec. / 0.5 sec.) for 30
seconds.
Non-Wiegand
Card accepted, card data presented to server
and accepted at the server.
On
Wiegand Card read, but not accepted Short pulse (<0.5 seconds)
Wiegand
Card presented correctly, server received the
data OK
Long pulse (2-4 seconds)
Error Codes
Also the server can generate error codes. These error codes are
shown when the card lies on the card reader. This error code will
enable the user to communicate the type of error without the
necessity of a service engineer to be present at the reader’s site.
Symbol Description LED
- Header or trailer of an error code Long Pulse
. Error code Short Pulse
Reader Status Code
Non-Wiegand Card reader not responding 9 error pulses (-.........-)
All
Error in the EEPROM configuration of IP
Controller board
10 error pulses (-..........-)