Inepro SCR708, Техническое руководство

Страница: 10 / 36

Introduction
2 - SCR708
Introduction
In this manual you find the instructions to install and configure your SCR708. This manual is meant for all the Inepro USB
RFID Readers.
This manual, the USB RFID Reader hardware and software are subject to change, make sure you have the latest version of
this manual, because the older versions may have become obsolete.
Function
The purpose of the USB RFID Reader is to read the unique ID contained in the card that is presented to the reader and
transfer this ID to a server. In most cases this data will be the card serial number. To facilitate this a variety of card reader
software modules have been developed. Our configuration tool will enable you to change the settings on the USB RFID
Reader board.
FCC Certified
Caution! Changes or modifications not expressly approved by INEPRO B.V. could void the user’s authority to operate the
equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required
to correct the interference at his own expense