Indutherm VC 400 LCD, Инструкция по эксплуатации

Страница: 6 / 42

86014010_04_OPERATING_MANUAL_VC400_LCD_GB.DOC 25.11.2016 KS
page 6

People with pacemakers must not be near the machine while it is running.

Trained responsible staff has to be supervised to work with this machine.
Use as determined/liability
This casting machine is designed and manufactured to comply with the latest technical
knowledge and according to approved safety regulations. When not putting into
operation correctly or not using the machine as determined, however, danger and
damages may occur. Therefore we suggest reading carefully and completely this
manual before putting the machine into operation and to follow the instructions given
therein:

This machine is only to be used for melting, casting and granulating of precious
metals normally used for the production of jewellery.

This machine may only be connected as mentioned in this manual. The mains
supply as well as in- and outgoing pressures are to be provided as stated on the
machine label.

This machine was designed for use in closed spaces (indoors) and may only be
used for the above-mentioned purpose.

Only original INDUTHERM consumable and spare parts are to be used.

The machine may not be modified in any way. Technical changes may only be
effected with INDUTHERM GmbH’s prior written permission.

Damages caused by disregard or false interpretation of the contents of this
instruction manual result in an immediate expiration of the machine guarantee.

This instruction manual is corresponding to the latest technical condition of the
machine when printed. Technical changes and fittings subject to change.

INDUTHERM GmbH cannot and will not take responsibility for any damages
resulting of the above mentioned.

This instruction manual may not even partially be reproduced (photocopy, micro
film, computer processing etc.) without prior written permission of INDUTHERM
GmbH.