CMF10
CMF10
Pre-programmed, configurable controller for
simple applications
• Language independent
• Simple configuration via the backlit display
• Input for an external setpoint device
The CMF10 range of controllers can be set to handle
everything from temperature or humidity control to
control of CO
2
or pressure. They are intended for DIN-
rail mounting.
• Pre-loaded with several application modes
• 24 V or 230 V AC supply voltage
• Week-based clock / calendar function
CMF
CMF10 is a pre-programmed controller that can be used
for control of temperature, CO
2
, pressure, and humidity
in air handling and heating applications. It is a stand-alone
controller for simpler applications. CMF is extremely easy
to install, commission and control.
CMF uses a display with an encoder knob, making
its built-in menu system very easy to use. Settings
are entered by turning the encoder knob to a desired
parameter/value. A value is then approved by pressing the
knob.
Models
The CMF series comprises two different types, CMF5U
and CMF10.
CMF5U has 5 in-/outputs and CMF10 has 10 in-/outputs.
CMF10 is available in two versions:
• CMF10 with 24 V AC supply voltage
• CMF10-230 with 230 V AC supply voltage
CMF has been developed according to our Ready-Steady-
Go concept, which simplifies every step from installation to
management.
Applications CMF10 and CMF10-230
CMF10 is pre-programmed with a choice of five different
control modes:
1. Supply air control
2. Supply air control with outdoor compensation
3. Cascaded room / extract air temperature control
4. Radiator circuit control
5. Domestic hot water control
Inputs and outputs
CMF10 has
• 2 analogue inputs, PT1000
• 1 SPI input for an external setpoint device
• 1 universal input, PT1000 or digital
• 2 digital inputs
• 3 digital outputs
• 2 analogue outputs, 0…10 V DC
Internal clock
CMF10 has a built-in week-based real-time clock with a
number of different scheduler alternatives.
Easy to install
CMF is suitable for DIN-rail or cabinet mounting. Since
the terminals are detachable all connections can be made
before CMF is installed.
revision
10 2015
