Bubble Level
Quick Release Plate
Tilt Lock Knob
Security
Locking Lever
Plate Locking Lever
USER NOTICE
Do not exceed the maximum specified
c
load capacity (see Specification chart)
Always ensure that leg and head locks
c
are tightly engaged before mounting a
camera on the tripod
Do not use the tripod below
c
temperatures of -4°F or above +158°F
(-20°C / +70°C)
Do not leave the product in the sun
c
for prolonged periods and avoid high
temperature exposure
For your safety, don’t let your Induro
c
tripod come in contact with any
electrical power source
Remove camera, lens, and all gear
c
from the tripod when transporting
the tripod
Avoid leaving the tripod unattended
c
in areas where people could trip over
the tripod and get hurt
Always clean and dry the tripod after
c
it has been exposed to wet, dusty,
sandy or salty conditions. Your tripod
is not recommended for use in salt
water. If required clean tripod using a
mild soap solution applied with a soft
cloth and follow by wiping down with
fresh water. Remove any dust, dirt or
sand from all leg locks, leg lock levers,
leg sections and all moving parts.