Indu-Sol PB-INspektor, Руководство пользователя

Страница: 4 / 36

Contents
1 Introduction 5
1.1 General 5
1.2 Overview of Licenses 5
2 Delivery Scope 6
3 Connectors and Status Displays 7
3.1 Connectors 7
3.2 Status LEDs 7
4 Installation and Connection 8
4.1 Installation 8
4.2 Measuring Location 8
4.3 Connection to PROFIBUS DP 9
4.3.1 Active PROFIBUS Cable 9
4.3.2 At the Bus End 10
4.3.3 Loop-in 11
4.4 Power Supply 12
5 Commissioning 12
5.1 First Connection to the Network 12
5.1.1 Case 1 - Local Access Only 14
5.1.2 Case 2 - Network Integration 14
5.1.3 Other Basic Settings 14
5.1.3.1 Internal Date and Time 14
5.1.3.2 Measuring Location 14
5.1.3.3 Favorites/Bookmarks 14
5.1.3.4 Language 14
5.2 Measuring Procedure – First Steps 15
5.2.1 Startup and Segment Detection 15
5.2.2 Factory Preset Alarm Defaults 15
5.2.3 Error Indication 16
5.2.4 Evaluation, Threshold Adjustment and Troubleshooting 16
5.2.5 Troubleshooting 17
6 Quality Parameters 18
6.1 Drop-outs 18
6.2 Diagnostics 18
6.3 Error telegrams 19
6.4 Retries 19
6.5 Bus Cycle Time 19
7 Web Interface 20
7.1 Startup Page/Overview 20
7.1.1 Event Overview (Network Overview) 21
7.1.2 Device Overview 21
7.2 Alarm List 22
7.3 Snapshots 22
7.4 System Information 22
7.5 Settings 23
7.5.1 Tresholds/Alarms 23
7.5.2 Last Cycle 23
7.5.3 Device Designations 23
7.5.4 System 24
7.5.4.1 Network 24
7.5.4.2 SNMP/LLDP 24
7.5.4.3 Time/Date 24
7.5.4.4 Password 24
7.5.4.5 License 24
7.5.4.6 Firmware 24
7.5.4.7 Restart 24
8 Snapshot Analysis 25
9 Troubleshooting 27
10 Specifications 29
11 GPL Information 29
12 CE Note 30
13 Notices 31