manualshive.com logo in svg

Indmar 454 Carbureted, Руководство оператора

Поделиться
Скачать
Indmar 454 Carbureted Скачать руководство пользователя страница 53

Indmar Marine Engines

6-5

Do not overfill. If your oil level is above the
full mark on the dipstick, the engine may be
damaged.

Indmar uses and recommends Pennzoil Marine 15W40 in
all 5.7L, 6.0L and 6.2L engines and Pennzoil Marine 40W
in all 7.4L, 8.1L and 8.2L engines. This oil meets the API
Service CI-4, CH-4, CG-4, CF-4, and CF/SL. If the engine
is to be used in conditions below 20 F (-7 C), use
Pennzoil 10W30 meeting the above API specifications.

The use of engine oil other than the recom-
mended viscosity with an API SJ/CG4 desig-
nation can cause engine damage. Damage to
your engine caused by the use of improper
oils is not covered by your warranty.

Synthetic Oil

Synthetic oil that meets our viscosity requirements and
API SL/SJ/CI-4, CH-4, CG-4 is acceptable to use after
100 hours of operation with the recommended oil. The use
of synthetic oil does not change the requirement of 50
hour (25 hour in severe conditions) oil change intervals.

Changing Oil

Change your engine oil after the first 10-20 hours of
operation. Then change oil every 50 hours (25 in 
severe conditions) or annually, whichever comes first.
To maximize engine life, change the oil filter at every 
oil change.

Figure 6.4 – Oil Filter

Indmar recommends all engine maintenance procedures
be performed by your dealer, including oil changes. If you
must perform the oil change yourself, operate the engine
to full operating temperature.

CAUTION

CAUTION

OM0502-05 Body.qxd  6/7/05  1:31 AM  Page 6-5

Содержание 454 Carbureted





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды