Indigo Nautilus GLH, Руководство пользователя

Страница: 8 / 14

Tank Mounting
The NAUTILUS
GLH
is designed to mount onto the back of the SCUBA tank. To do so,
loop the strap into the buckle forming a loop. Slide the loop and NAUTILUS
GLH
over the
tank until the bottom of the NAUTILUS
GLH
is about 1/2 inch from the bottom of the tank.
Tighten the strap. NOTE: If the BCD cam strap inter-fears, leave the NAUTILUS
GLH
loose
in position. Tighten the BCD and then tighten NAUTILUS
GLH
.
Trigger Warnings
• The trigger is ALWAYS to be used in the left hand. This keeps your right hand
free to access your air source should the need arise.
Forward/Reverse
NAUTILUS
GLH
features both forward and reverse control. The trigger is a rocker design.
When the front (away from the connecting wire) is depressed, NAUTILUS
GLH
will drive
forward. When toggled toward the wire connection or back, it will reverse.
Sleep Mode
To ensure that maximum battery is available and to protect against accidentally pushing
the trigger in travel, the NAUTILUS
GLH
goes into a sleep mode when not toggled for three
minutes.
TO TAKE OUT OF SLEEP MODE TOGGLE THE FOLLOWING SEQUENCE. THE
SEQUENCE TIMER IS 3 SECONDS... NO NEED TO RUSH.
REVERSE
FORWARD
FORWARD
A tone will sound. If no tone sounds, wait four seconds and re-enter the code.
7