indieASSIST 435
user manual
15
Alignment of the image position
The position of the image on the CMOS chip and its focus can
vary slightly from film camera to film camera. The video image
on the monitor may appear not centred or rotated. It can be
adjusted using a hex-screwdriver (tip size 2mm).
First, remove the protection caps inside the openings for the
adjustment screws. Be sure to re-install them after you have
finished adjustments.
Caution: Do not use excessive force when turning the
adjustment screws!
X-Axis
The adjustment-screw “X-axis” located on the top side of the
indieASSIST 435 moves the video image on the monitor
horizontally.
