UNICAIR CDMA Mobile Phone Model: C201S
15
5.
5. Basic Operation
5.1 Turning the Phone On and Off
1.1 Turning the Phone On
1) Install a charged battery pack or connect the phone to an external power source
such as the cigarette lighter charger or car kit.
2) Hold down
for 2 seconds until the LCD screen flashes.
5.1.2 Turning the Phone Off
Press and hold the
until the display screen turns off, then release the key.
5.2 Signal Strength
If you’re inside a building, being near a window may give you better reception. You can
see the strength of your signal by the signal indicator
on your phone’s display
screen.
5.3 Power Saving Mode
When the phone is in an area without service for about 15 minutes, it stops searching
for service and enters into the Power Saving Mode. When your phone activates this
feature, Power Saving is displayed on your screen. The phone automatically checks for
service periodically or you can check manually by pressing any key.
5.4 Speaker Phone
This function is a convenient feature which enables you to call using speaker phone
button in on-hook state.
5.5 Navigation Key
Every time when you button left key will enter to Profiles, right key into Message: up key
is show the mode, down key is shutcut menu
5.6 Making Calls
Every time you make a call, follow these steps:
1) Make sure that the phone is turned on. If not, hold down
for 2 seconds.
2) Type the phone number and then press
.
• If the phone is locked, type the lock code. The lock code/password is commonly
0000 by default.
3) To end the call, press
.
Note:
In no service area,
appears on the screen. When trying voice call in no
service area, “Call failed” is displayed. It means you are in no service area.
5.7 Receiving Calls
1) When the phone rings or vibrates (if the Vibrate Mode is enabled), press
to
answer.
• When you press
once, when a call is received, the phone stops ringing or
vibrating depending on the mode it is in. Press again to reject the call.
2) To end an answered call, press
.
5.8 Redialing Last Outgoing Number
Press key
twice to redial the last number in Recent Calls.
