Indian Motorcycle Indian Challenger 2020, Руководство пользователя

Страница: 69 / 178

OOPPEERRAATTIIOONN
OOVVEERRVVIIEEW W
The operation section of this manual describes how to ensure
maximum performance and longevity through the proper care and
operation of your motorcycle.
Important areas covered by the operation section include:
• Engine Break-In
• Fueling
• Starting the Engine
• Shifting Gears
• Using Cruise Control (if
equipped)
• Accelerating
• Braking
• Stopping the Engine
• Parking
TIP
Even if you’re an experienced motorcycle operator or passenger,
read all of the safety information in this manual before operating
the motorcycle. See page 9.
EENNGGIINNEE BBRREEAAKK--IINN
The engine break-in period for your motorcycle is the first 500
miles (800 km) of operation. During this break-in period, critical
engine parts require special wear-in procedures so they seat and
mate properly. Read, understand and follow all break-in
procedures to ensure the long-term performance and durability of
your engine.
NOTICE
Failure to properly follow the engine break-in procedures
outlined in this manual can result in serious damage to the
engine. Avoid full throttle operation and other conditions that
may place an excessive load on the engine during the break-in
period.
The more cautiously you treat your motorcycle during the break-in
period, the more satisfied you will be with its performance later
on. Overloading the engine at low RPM and/or running the engine
prematurely at high RPM may result in damage to the pistons and/
or other engine components.
Observe the following precautions during the break-in period:
• Upon initial start-up, do not allow the engine to idle for long
periods as overheating can occur.
• Avoid fast starts with wide open throttle. Drive slowly until the
engine warms up.
• Avoid running the engine at extremely low RPM in higher gears
(lugging the engine).
• Drive within the recommended operating speeds and gears.
67
OPERATION