Indexator LINKSYS MPB1-80/45 KPL, Руководство пользователя

Страница: 6 / 8

6
6.1
6.2
6.3
6.4
6.5
6.7
6.8
6. Maintenance instructions
6.1 Lubricate the link’s bearings every 50
hours.
6.2 In order to achieve the best operating
purpose possible the sleeves G should
be greesed both in- and outside, and the
tube H greesed outside with copper
paste or similar every 1000 working
hours. See 4.3.3.
6.3 Adjust the brake when necessary,
see 4.3.5.
6.4 Check that there are no cracks in the
upper or lower attachment of the rotator.
6.5 Check that no abnormal play has arisen
in the link´s bearing. Differences in
excess of 1,0 mm must be corrected.
6.6 If any leakage of hydraulic oil should
occur, it might be necessary to clean the
brake discs. To disassamble and assem
ble, see item 4.3.
If any of the problems in points 6.4, 6.5
are detected, contact your dealer,
for replacement of worn and defective
defective components.
6.7 In order to preserve the function and
a long service life of the swing damper
the brake linings have to be checked
and cleaned every 600 working hours or
every second month.
• Dismount the brake package.
• Remove the grinding dust that piled up
in the cavities of the lining.
• Rotate the inner race of the bearing 360
degrees. See sketch below.
• Reassemble the brake package if the
bearing runs smoothly with no play.
If there is play in the bearing, if it feels
tight, or if the rubber seal is damaged the
bearing should be replaced.
7. Technical data
For futher technical information we refer
to our product data sheets.