Sort by recording mode
Click on any file to select it.
The playback can be controlled by clicking the following symbols:
Playback /
Pause /
Backwards /
Forwards /
Stop
The files can be deleted using the following symbols:
Delete selected file
Delete all files
Note: The storage location on the hard disc can be seen by clicking
and
“Storage”.
Click
.
Click “Display”.
If you wish to have a time and date stamp on the recorded images then
click on “Time Stamp”.
If you wish to write the name of the camera on the recorded images then
click on “Camera Name” (in this case the camera name must also be set).
Enter the camera name if required.
Click
to activate the selected settings.
If you wish to pair the transmitter to another channel or to pair an additional
transmitter (max. 3 additional transmitters) with the monitor this can be done
using the buttons on the remote control (see section 12.4) or alternatively on
the PC:
Click
.
Click “Device”.
Check that the camera is powered (POWER LED [9] lights red) and that it is
!
!
!
!
!
!
!
!
!
!
15.11 Display setup
15.12 Advanced function: camera pairing
within the reception range of the monitor.
Check that “Digital Wireless Camera” is selected.
Click on the chosen camera channel “CAM1” to “CAM4”.
Within 60 seconds press the pairing button [11] on the transmitter and
hold it pressed for 5 seconds.
Click
to save the selected settings.
A successfull connection is indicated by the display of the camera picture on the
screen and the lighting of the red connection LEDs [10 and 21].
The wireless range is dependent on many factors. In an ideal location and by
free line of sight (between both antennas) a range of up to 200 m is possible,
within buildings this is reduced to maybe 20 m.
The range cannot be guaranteed as it is dependent on the local conditions.
A reduction of the range will be caused by:
Walls and Floors, in particular those of metal or with metal reinforcement
Coated windows (eg. those with Insulating glass), radiators, mirrors and
other metal surfaces
Electrical cables and electrical products (eg. Those containing electrical
motors, microwave ovens)
Devices using the same or similar frequency (eg. WLAN-systems)
The products are maintenance-free: do not open the housings
Check the safety and function regularly
If the range of the remote control becomes weak, replace the battery
(CR2025)
Remove the mains adapters from the mains sockets before cleaning
Use a soft, slightly moist cloth or brush to clean the surfaces
Additional transmitter DF-210TX with accessoires. Art. Nr. 27 251
Antenna extension cable for camera with wallbracket
length 2 m, absorption 1,6 dB, Art. Nr. 27 243
length 4 m, absorption 3,2 dB, Art. Nr. 27 244
Additional wireless camera with accessories. Art. Nr. 27 2331
Do not dispose of packaging material, used batteries or products as
household waste. Please use your recycling system. Details are
available from your local authority.
Indexa GmbH , Paul-Böhringer-Str. 3, D- 74229 Oedheim declares that this
product complies with the basic requirements and the other relevant
regulations of Directive 1999/5/EC. Conformity has been demonstrated. The
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
16. Wireless range
17. Maintenance and cleaning
18. Optional Accessoires
19. Disposal
20. Declaration of conformity
32 - GB
