Index G200.2 Скачать руководство пользователя страница 59

Страница: 59 / 110

C155

- Check coolant

Orientation

For add-on equipment that cannot be cooled conventionally with cooling lubricants

or hydraulic fluid due to high temperature development, separate cooling is provided

in an independent cooling circuit. The coolant used here must be checked

continuously for its condition like other coolants.

Apart from this interval, the coolant should generally be replaced

once a year.

The system comprises a cooling circuit on the machine side and either

1. a water recooler located next to the machine or

2. an external cooling circuit provided by the machine operator.

Due to different requirements and/or specifications of the respective

manufacturers, be sure to review the respective manufacturer's

documentation!

For all work in connection with operating materials, the information in

the data sheets of the respective manufacturers and the information

in the document Notes on Operating Materials must be observed.

Requirement

Replenish only coolant of the same manufacturer having the same

specification. Mixing different coolants may lead to corrosion of the

cooling system and degradation of the coolant. Required glycol

concentration min. 25%.

When switching the coolant to another product or changing the

manufacturer, the cooling system must be completely flushed and

cleaned with this coolant. When preparing the coolant from

concentrate and water, be sure to use demineralized water only. Only

then the machine may be put back into operation.

The machine is filled with Nalco VARIDOS FSK25 at the factory. This

water-glycol mixture can be ordered in 25 kg pack sizes from INDEX.

When using a water recooler, be sure to follow the manufacturer’s

instructions.

Due to different requirements and/or specifications of the respective

manufacturers, be sure to review the respective manufacturer's

documentation!

Maintenance Summary - 2.000 Operating hours

Maintenance Instructions

G200.2

DIE078EN - 05.06.2019

Содержание G200.2















































































































Результаты поиска

Содержание G200.2

Отзывы:

Похожие инструкции для G200.2

Бренды по названию

Популярные бренды

Index G200.2, Инструкция по обслуживанию

Результаты поиска

Содержание G200.2

Отзывы:

Похожие инструкции для G200.2

Бренды по названию

Популярные бренды