6
GB
Description of the washing
machine
Control panel
TEMPERATURE
button
WASH
CYCLE
SELECTOR
KNOB
Detergent dispenser drawer
ON/OFF
button
SPIN
button
START/PAUSE
button
and indicator light
DELAYED
START
button
OPTION
buttons
Detergent dispenser drawer:
used to dispense
detergents and washing additives (
see “Detergents and
laundry”
).
ON/OFF
button: press this briefly to switch the
machine on or off. The START/PAUSE indicator light which
flashes slowly in a green colour shows that the machine is
switched on. To switch off the washing machine during the
wash cycle, press and hold the button for approximately 3
seconds; if the button is pressed briefly or accidentally the
machine will not switch off.
If the machine is switched off during a wash cycle, this
wash cycle will be cancelled.
PUSH & WASH
button
:
(
see “Wash cycles and options”
)
.
WASH CYCLE SELECTOR KNOB
:
used to set the
desired wash cycle (see “
Table of wash cycles
”).
OPTION
buttons
:
press to select the available options.
The indicator light corresponding to the selected option will
remain lit.
TEMPERATURE
button: press to reduce or
completely exclude the temperature; the value appears on
the display.
SPIN
button: press to reduce or completely exclude
the spin cycle; the value appears on the display.
DELAYED START
button: press to set a delayed
start for the selected wash cycle; the delay period appears
on the display.
START/PAUSE
button and indicator light: when the
green indicator light flashes slowly, press the button to
start a wash cycle. Once the cycle has begun the indicator
light will remain lit in a fixed manner. To pause the wash
cycle, press the button again; the indicator light will flash
in an amber colour. If the symbol is not illuminated, the
door may be opened. To start the wash cycle from the
point at which it was interrupted, press the button again.
Standby mode
This washing machine, in compliance with new energy
saving regulations, is fitted with an automatic standby
system which is enabled after about 30 minutes if no
activity is detected. Press the ON-OFF button briefly and
wait for the machine to start up again.
DISPLAY
PUSH & WASH
button
