9
GB
Service
Tr
oubleshooting
Precautions
Care
Programmes
Detergents
Installation
Description
Personalisations
Setting the temperature
Turn the TEMPERATURE knob to set the wash temperature
(see Programme table on page 8)
.
The temperature can be lowered, or even set to a cold wash ( ).
Functions
To enable a function:
1. press the button corresponding to the desired function, according to the table below;
2. the function is enabled when the corresponding button is illuminated.
Note: The rapid flashing of the button indicates that the corresponding function cannot be selected for the
programme set.
Function
Effect
Comments
Enabled with
programmes:
Rapid
wash
Cuts the duration
of the wash cycle
by 30%.
1, 2, 3, 4,
5, 6, 7
Anti-
crease
This option
reduces the
amount of
creasing on
fabrics, making
them easier to
iron.
When this function is set, programmes 5, 6, 7, 9, 10 will end with
the laundry left to soak (Anti-crease) and the Rinse cycle phase
LED will flash.
- to conclude the cycle, press the START/PAUSE button;
- to run the draining cycle alone, set the knob to the relative
symbol and press the START/PAUSE button.
5, 6, 7, 9, 10,
Delicate
Rinse cycle.
The machine has an intelligent built in check for out of balance loads. To let protect your machine it may reduce the
final spin speed if an unbalanced load is detected.
The balancing attempts may extend the total duration of the cycle, up to a maximum of 10 minutes.
All manuals and user guides at all-guides.com