Indesit K 642 V/G, Инструкция по установке и эксплуатации

Страница: 11 / 16

11
Cooker routine maintenance and cleaning
Before each operation, disconnect the cooker from
the electricity.To assure the long life of the cooker, it must
be thoroughly cleaned frequently, keeping in mind that:
·
the enamelled parts and the self-cleaning panels are
washed with warm water without using any abrasive
powders or corrosive substances which could ruin
them;
·
the inside of the oven should be cleaned fairly often
while it is still warm using warm water and detergent,
followed by careful rinsing and drying;
·
the flame spreaders should be washed frequently with
hot water and detergent taking care to eliminate any
scale;
·
in cookers equipped with automatic lighting, the
terminal part of the electronic instant lighting devices
should be cleaned frequently and the gas outlet holes
of the flame spreaders should be checked to make
sure they are free of any obstructions;
·
Stainless steel may become marked if it comes into
contact with very hard water or harsh detergents
(containing phosphorous) for long periods of time. After
cleaning, it is advisable to rinse thoroughly and dry. It
is also recommended to dry any water drops;
•
On models with glass covers, the covers should be
cleaned with hot water; the use of rough cloths or
abrasives is to be avoided.
N.B: avoid closing the cover while the gas burners are
still warm.
Important: periodically check the wear of the gas hose
and substitute it if there are any defects; we recommended
changing it every year.
Replacing the oven lamp
·
Unplug the oven from the mains;
·
Remove the glass cover of the lamp-holder;
·
Remove the lamp and replace with a lamp resistant to
high temperatures (300°C) with the following
characteristics::
- Voltage 230V
- Wattage 25W
- Type E14
·
Replace the glass cover and reconnect the oven to
the mains.
Greasing the taps
The taps may jam in time or they may become difficult to
turn. If so, they must be cleaned internally and the grease
replaced.
N.B: This operation must be carried by a technician
authorised by the manufacturer.