background image

8

GB

Running a wash cycle

1. 

SWITCH THE MACHINE ON.

 Press the   button; the 

START/PAUSE indicator light will flash slowly in a green 

colour.

2. 

LOAD THE LAUNDRY.

 Open the porthole door. Load 

the laundry, making sure you do not exceed the maximum 

load value indicated in the table of programmes on the 

following page.

3. 

MEASURE  OUT  THE  DETERGENT.

  Pull  out  the 

detergent dispenser drawer and pour the detergent into 

the relevant compartments as described in 

“Detergents 

and laundry”.

4. 

CLOSE THE DOOR.

5. 

SELECT THE WASH CYCLE.

 Set the WASH CYCLE 

knob to the desired programme; a temperature and spin 

speed is set for each wash cycle; these may be adjusted. 

The duration of the cycle will appear on the display.

6. 

CUSTOMISE  THE  WASH  CYCLE. 

Use  the  relevant 

buttons:

 

 

 

Modifying  the  temperature  and/or  spin 

speed.

 The machine automatically displays the maximum 

temperature and spin speed values set for the selected 

cycle,  or  the  most  recently-used  settings  if  they  are 

compatible with the selected cycle. The temperature can 

be  decreased  by  pressing  the    button,  until  the  cold 

wash “OFF” setting is reached. The spin speed may be 

progressively reduced by pressing the   button, until it is 

completely excluded (the “OFF” setting). If these buttons 

are pressed again, the maximum values are restored.

 Setting a delayed start.

To set a delayed start for the selected programme, press 

the  corresponding  button  repeatedly  until  the  required 

delay  period  has  been  reached.  When  this  option  is 

enabled, the   symbol lights up on the display. To remove 

the  delayed  start  option  press  the  button  until  the  text 
“OFF” appears on the display.

 

 

 

 

Modifying the cycle settings.

•  Press the button to enable the option; the indicator light 

corresponding to the button will switch on.

•  Press  the  button  again  to  disable  the  option;  the 

indicator light will switch off.

!

  If  the  selected  option  is  not  compatible  with  the 

programmed wash cycle, the indicator light will flash and 

the option will not be activated.

!

 

If  the  selected  option  is  not  compatible  with  another 

option which has been selected previously, the indicator 

light corresponding to the first option selected will flash 

and only the second option will be activated; the indicator 
light corresponding to the enabled option will remain lit.

!

 

The options may affect the recommended load value 

and/or the duration of the cycle.

7. 

START THE PROGRAMME.

 Press the START/PAUSE 

button.  The  corresponding  indicator  light  will  become 

green, remaining lit in a fixed manner, and the door will 

be locked (the DOOR LOCKED symbol   will be on). To 

change a wash cycle while it is in progress, 

pause the 

washing machine

 using the START/PAUSE button (the 

START/PAUSE indicator light will flash slowly in an orange 

colour); then select the desired cycle and press the START/

PAUSE button again.

  To open the door while a cycle is in progress, press the 

START/PAUSE button; if the DOOR LOCKED   symbol is 

switched off the door may be opened. Press the START/

PAUSE button again to restart the wash cycle from the 

point at which it was interrupted.

8. 

THE END OF THE WASH CYCLE.

 This will be indicated 

by the text “END” on the display; when the DOOR LOCKED 

 symbol switches off the door may be opened. Open the 

door, unload the laundry and switch off the machine.

!

 If you wish to cancel a cycle which has already begun, press 

and hold the   button. The cycle will be stopped and the 

machine will switch off.

Содержание IWE 91480

















Отзывы:

Похожие инструкции для IWE 91480