background image

8

EN

Energy Saving Tips

- It is important to try and run the dishwasher when it is fully
loaded in order to save on energy. In order to prevent odors
from forming and food from caking onto the dishes, you
can run the hold cycle.

- Choose the right wash cycle: the choice of cycle depends
on the type of dishware, cookware and utensils being
washed and how dirty they are.

- Use the right amount of detergent: if you use too much
detergent, the result will not be cleaner dishes, but, rather,
a greater negative impact on the environment.

- There is no utility in rinsing dishes, cookware and utensils
before placing them in the dishwasher.

After Every Wash

After every wash, turn off the water supply to the appliance
and leave the door slightly ajar so that moisture and odors
are not trapped inside.

Remove the Plug

Before cleaning or performing maintenance, always remove
the plug from the socket. Do not run risks.

No Solvents or Abrasive Cleaning Products

To clean the exterior and rubber parts of the dishwasher, do
not use solvents or abrasive cleaning products. Rather, use
only a cloth and warm soapy water.
To remove spots or stains from the surface of the interior,
use a cloth dampened with water and a little white vinegar,
or a cleaning product made specifically for dishwashers.

When You Go on Holiday

When you go on holiday, it is recommended that you run a
wash cycle with the dishwasher empty and then remove
the plug from the socket, turn off the water supply and
leave the door of the appliance slightly ajar. This will help
the seals last longer and prevent odors from forming within
the appliance.

Moving the Appliance

If the appliance must be moved, try to keep it in the vertical
position. If absolutely necessary, it can be positioned on its
back.

Seals

One of the factors that cause odors to form in the dishwasher
is food that remains trapped in the seals. Periodic cleaning
with a damp sponge will prevent this from occuring.

How to Keep Your Dishwasher in Shape

The European Directive 2002/96/EC on Waste Electrical and
Electronic Equipment (WEEE), requires that old household
electrical appliances must not be disposed of in the normal
unsorted municipal waste stream. Old appliances must be
collected separately in order to optimise the recovery and
recycling of the materials they contain and reduce the impact
on human health and the environment.

Disposal of old electrical appliances

The crossed out "wheeled bin" symbol on the product
reminds you of your obligation, that when you dispose of
the appliance it must be separately collected.

Consumers should contact their local authority or retailer for
information concerning the correct disposal of their old
appliance.

Содержание IDL 530

















Отзывы: