Indesit I6G52 Скачать руководство пользователя страница 8

Страница: 8 / 16

Start-up and use

Usin

g the hob

Lighting the burners

For each BURNER knob there is a full ring showing the strength of the
flame for the relevant burner.
To light one of the burners on the hob:
1. Bring a flame or gas lighter close to the burner.
2. Press the BURNER knob and turn it in an anticlockwise direction
so that it is pointing to the maximum flame setting E.
3. Adjust the intensity of the flame to the desired level by turning the
BURNER knob in an anticlockwise direction. This may be the
minimum setting C, the maximum setting E or any position in between
the two.

If the appliance is fitted with an electronic lighting device*
(

see figure

), press the ignition button, marked with the

symbol

, then hold the BURNER knob down and turn it

in an anticlockwise direction, towards the maximum flame
setting, until the burner is lit.The burner may be
extinguished when the knob is released. If this occurs,
repeat the operation, holding the knob down for a longer
period of time.

! If the flame is accidentally extinguished, switch off the burner and
wait for at least 1 minute before attempting to relight it.

If the appliance is equipped with a flame failure safety
device*, press and hold the BURNER knob for
approximately 3-7 seconds to keep the flame alight and to
activate the device.

To switch the burner off, turn the knob until it reaches the stop position
•.

Practical advice on using the burners

For the burners to work in the most efficient way possible and to save
on the amount of gas consumed, it is recommended that only pans
that have a lid and a flat base are used. They should also be suited to
the size of the burner:

Burner

Cookware diameter (cm)

Fast (R)

24 - 26

Semi Fast (S)

16 - 20

Auxiliary (A)

10 - 14

To identify the type of burner, please refer to the diagrams contained in

the “Burner and nozzle specifications”.

Using the oven

! The first time you use your appliance, heat the empty oven with its
door closed at its maximum temperature for at least half an hour.
Ensure that the room is well ventilated before switching the oven off
and opening the oven door. The appliance may emit a slightly
unpleasant odour caused by protective substances used during the
manufacturing process burning away.

! Before operating the product, remove all plastic film from the sides of
the appliance.
! Never put objects directly on the bottom of the oven; this will avoid
the enamel coating being damaged.

1. Select the desired cooking mode by turning the SELECTOR knob.
2. Select the recommended temperature for the cooking mode or the
desired temperature by turning the THERMOSTAT knob.
A list detailing cooking modes and suggested cooking temperatures
can be found in the relevant table (

see Oven cooking advice table

HOB GAS BURNER
SAFETY DEVICE

ELECTRONIC
LIGHTING DEVICE

Flame adjustment according to levels

the burner flame intensity can be adjusted with the
knob according to 6 power levels, from maximum
to minimum with 4 intermediate positions:

a click will indicate the change from one level to
another when turning the knob. The system
guarantees a more precise adjustment, allows
to replicate the flame intensity and to identify
easily the preferred level for different cooking
operations.

Flame adjustment according to levels

Practical advice on using the burners

Using the oven

During cooking it is always possible to:
• Change the cooking mode by turning the SELECTOR knob.
• Change the temperature by turning the THERMOSTAT knob.
• Stop cooking by turning the SELECTOR knob to the “0” position.

! Always place cookware on the rack(s) provided.

THERMOSTAT indicator light

When this is illuminated, the oven is generating heat. It switches off
when the inside of the oven reaches the selected temperature. At this
point the light illuminates and switches off alternately, indicating that
the thermostat is working and is maintaining the temperature at a
constant level.

Oven light
This is switched on by turning the SELECTOR knob to any position
other than “0”. It remains lit as long as the oven is operating. By

selecting with the knob, the light is switched on without any of the
heating elements being activated.