welcome
7.
Start the wash cycle by shutting the door.
8.
The end of the wash cycle is indicated by beeps and by the flashing of the wash cycle number on the display.
Open the door, switch off the appliance by pressing the On/Off buton.
9.
Wait for a few minutes before removing the crockery, in order to avoid burns. Unload the racks beginning with
the lower level.
Modifying a wash cycle in progress
If a mistake was made during the wash cycle selection process it is possible to change the cycle, provided that it has
only just begun: open the door taking care to avoid the escaping steam, by pressing and holding the On/Off button,
the machine will switch off. Switch the machine back on using the On/Off button and select the new wash cycle and
any options desired; start the cycle by closing the door.
Adding extra crockery
Without switching off the machine, open the door, taking care to avoid the escaping steam, and place the crockery
inside the dishwasher. Shut the door and the cycle will begin from the point at which it was interrupted.
Accidental interruptions
If the door is opened during the wash cycle, or if there is a power cut, the cycle stops. It starts again from the point at
which it was interrupted once the door has been shut or the electricity supply is restored.
