inDESIGN iD-SM30, Руководство по установке и эксплуатации

Страница: 12 / 12

iD-SM30: INSTALLATION & OPERATION MANUAL PAGE 12
Warranty Exclusions
The Warranty does not cover damage caused by;
• Misuse or abuse of the product by You;
• Incorrect operation or not following the operation instructions (as noted in the operating instructions);
• Improper installation;
• Incorrect or improper maintenance or failure to maintain the product;
• Failure to clean or improper cleaning of the product;
• Incorrect voltage or non-authorised electrical connections;
•
Adverse external conditions such as incorrect or fluctuations in electrical voltage, thunderstorm activity,
acts of God, acts of terrorism, damage caused by vermin, or any other circumstance beyond NAS’s
control;
• Exposure to excessive heat, moisture or dampness;
• Exposure to abnormally corrosive conditions;
•
Alterations or modifications to the product made by You or a third party; or
• Damage as a result of accident, liquid, grit, impact or lack of proper care as indicated in the operating
instructions;
• Damage resulting from the use of cleaning solvents such as acetone
The Warranty does not apply if any serial number or appliance plate on the product has been tampered
with, removed or defaced.
The Warranty does not apply if the product has been repossessed under any financial agreement.
The Warranty excludes accessories and consumable goods which have ceased working through normal
wear and tear such as, but not limited to, batteries, lamps and other parts classifiable as a consumable part.
This includes the CD mechanism and laser fitted to the inDESIGN iDCDP-110.
These parts carry a 3 month warranty.
The Warranty does not cover the loss of any data howsoever caused. You shall be responsible for backing
up and protecting data against loss, damage or destruction.
Products presented for repair may be replaced by refurbished products of the same type rather than being
repaired. Refurbished parts may be used to repair the products. Replacement of the product or a part does
not extend or restart the Warranty Term.
The product will be at the owner’s risk whilst in transit to and from all NAS authorised service centres,
unless transported by NAS or its authorised representatives.
NAS and its authorised service centres may seek reimbursement of any costs incurred by them when
the product is found to be in good working order.
The cost of claiming under this warranty, including return of any product to NAS is to be borne by
the consumer.
The Warranty excludes removal or reinstallation costs.
* All inDESIGN products come with a 5 year warranty term.
For further information and warranty claims, refer to our Support page at www.nas.solutions