PRESSURE TEST PUMP INSTRUCTION MANUAL
INTRODUCTION
Hydraulic Pressure Test Pump is used to test water and oil line. Its design and structure
tool strong and light weight with high pressure hose & connectors. Seals are made of best
material to ensure the regular working without trouble.
Page # 3- M:231B/D/E/F/G
SAFETY INSTRUCTIONS
WARNING :
When using tools, the following safety instructions must be observed to reduce the
risk of personal injury and property damage.
Please read and observe the following instructions before use.
1. Keep work area clean :
An untidy and cluttered work area increases the risk of accidents
2. Use eye protection :
Always use safety glasses or goggles. A face mask should also be worn when
dust is generated.
3. Wear suitable work clothes :
Don't wear loose fitting clothes or jewellery. They can be caught in
moving parts and may cause injury. For outdoor work rubber gloves and non-stick footwear are
advised. Wear a protective hair net to contain long hair.
4. Keep children away :
Children should be kept away from the work area. Do not permit them to handle
the Hydraulic Tool.
5. Secure the work pieces :
Use Test Pump with secure hand to avoid accident.
6. Don't over reach when working :
Keep a balanced footing at all times. Avoid abnormal stances and
awkward body positioning.
7. Do not overload or force tools :
Tools operate better in the specified performance ranges. Forcing
the tool may cause damage.
8. Check for damage :
Before further use always check the protection guards carefully to ensure proper
operation and performance. Check for alignment of moving parts, binding of moving parts, breakage
of parts, mountings and any other condition that may effect the tools operation. An authorised service
dealer should properly repair all damaged parts unless otherwise indicated elsewhere in the
instruction manual. Do not use the tool if sufficient water not available.
9. Storage :
When not in use your tools should be stored in a dry area, which is not accessible to
children.
10. Stay alert :
Do not use the tool when you are tired. Use common sense and watch what you are
doing.
11. Remove keys and spanners :
Do not forget to remove any adjustment keys, spanners and
wrenches before storing the tool.
SINCE 1958
P
R
E
S
S
U
R
E
T
E
S
T
P
U
M
P
User’s Instruction Manual
Model : P-231D
Note :
Before using this
Hydraulic Pressure Test Pump
carefully read
through this INSTRUCTIONS MANUAL to ensure efficient, safe
operation. It is recommended that these INSTRUCTIONS be kept readily
available as an important reference when using this Pressure Test Pump
