Indemnis Nexus Mini, Руководство по эксплуатации

Страница: 14 / 22

14 14
N E X U S M I N I | E Q U I P M E N T O P E R AT I O N S G U I D E - V 1 . 0
CHECKLIST
|
Aircraft Inspection Checklist:
Propellers installed and checked for cracks
Batteries are charged and firmly in place
DJI remote batteries are charged
Nexus Mini battery charged
Nexus Mini MTD remote charged
Nexus Mini Installation:
Aircraft Top “Hot Zone” cleared before
removing Nexus Mini from its case
Nexus Mini is attached to aircraft and aligned
Nexus Mini Line Lock is secure
Antenna needs to be offset to avoid upward facing
collision sensor at the rear of the aircraft
Nexus Mini triangular tabs aligned and
props spin freely
Pre-flight Checklist:
T/O | LZ clear and safe from other individuals
Power on Aircraft
Power on Nexus Mini MTD
Power on Nexus Mini PRS
Wait for boot up tones and LED indication
MTD reads “Ready for Pre-Arm”/LED indicates scrolling blue
Pre-Arm Nexus Mini (Scrolling yellow/MTD indicates “Pre-Arm”)
RPIC clear of the T/O | LZ
Flight Checklist:
No errors present
All individuals clear the T/O | LZ
Airspace/Mission Route Clear for T/O
Climb above 50 ft (15.24 m) and ensure Nexus Mini is Armed
Post-flight Checklist:
Land aircraft
Stop aircraft propellers
The Nexus Mini LED indication is scrolling yellow and MTD shows
“System Pre-Armed”
Disarm Nexus Mini via MTD, LED should turn scrolling green and MTD
should read “Disarmed”
Enter LZ, power off Nexus Mini PRS
Power off aircraft
Power off Nexus Mini MTD
Remove aircraft from LZ while keeping Nexus Mini PRS pointed in safe
direction, place the Nexus Mini PRS in its case.