HFL-300/400 User Manual
Page 7 of 16
Copyright 2020 IndeeLift Inc. All Rights Reserved
Charging the Battery:
It is recommended that the HFL be fully charged before its first use.
1.
Position the HFL near a standard commercial AC wall power outlet.
2.
Attach the female end of the AC power cord to the connector on top of the HFL’s battery charger.
3.
Attach the male end of the AC power cord to a standard commercial AC wall power outlet.
The green LED on the battery charger becomes lit
and, within 15 seconds, the orange LED on the
battery begins to flash. This indicates that the
battery is charging.
After an initial charge of up to eight hours, the
battery is fully charged and the orange LED on the
battery stops flashing.
4.
Once the unit is fully charged, disconnect the power cord from the charger and wall outlet,
then store it in a safe location for use the next time the unit needs charging.
NOTES: When the HFL’s battery is running low, it will emit a steady tone when pressing the up
or down button on the wired remote. This indicates that it’s time to recharge the battery. Each
charge is good for at least 10 lifts, depending on the weight of the person being lifted. If you
need to use the HFL when the battery requires charging, or if the battery fails to operate the
HFL, the lift can be operated with the power cord connected to an AC wall outlet.
