IN-X300
The "User information" tree item shows the information entered during the registration process.
The "System Settings" tree item shows the following settings for the terminal services software.
Double-clicking on the name of the setting allows you to adjust it, unless it is read-only, which is specified
below.
•
Maximum number of stations (incl. Host)
: the maximum number of sessions the terminal services software
is configured to support. This number includes the host PC. This setting is read-only.
•
Current number of additional stations
: the number of additional stations. This setting is read only.
•
This machine
: the name of the host PC. This setting is read-only.
•
This user
: the currently logged-in user’s username. This setting is read-only.
•
System uptime
: how long the system has been up. This setting is read-only.
•
Start stations at boot?
: whether or not the stations start when the host PC boots. You can set this either on or
off.
•
Allow Shutdown/Reboot from stations
: whether or not the stations are given the option to shutdown or
reboot the host PC. You can set this either on or off.
•
IN-X300 card video mode settings
: The video mode settings for the IN-X300 stations. You can set this to
either 800x600 or 1024x768.
•
Allow only the last logged in user the shutdown of the system
: whether or not it is required that there is one
and only one user logged on for the system to be shut down or rebooted. You can set this either on or off.
•
Delay until shutdown (seconds)
: the default amount of time after a shutdown command is issued until the
shutdown occurs. You can set the number of seconds.
- 28 -
