Incriminator Audio IA40,1, Руководство пользователя

Страница: 6 / 8

Using a dual amplifier conf iguration, the MASTER amplifier has total control over the SLAVE amplifier.
When using dual amplifier to operate subwoofer, the positive terminal of the subwoofer's
voice coil must be connected to the positive terminal of the MASTER Amplifier and the negative terminal
of the subwoofer's voice coil must be connected to positive terminal of the SLAVE Amplifier.
When hooking two amplifiers to it, please check the power handling capabilities of your subwoofers
if they are not exceeded.
++
--
2~8 ohms
In linkable/bridgeable mode connection, total impedance must be more than 2 load.
Any impedance (load) smaller than 2 could damage the amplifier.
Caution
DUAL AMP POWER AND SPEAKER CONNECTION (Linkable)
Use 8 Gauge(AWG) wire cable
"MASTER UNIT"
"SLAVE UNIT"
-6-
to REMOTE Turn-on
from HEAD UNIT
BATTERY
CAR STEREO HEAD UNIT
GROUND
To +12V DC To +12V DC
GROUND
to REMOTE Turn-on
from HEAD UNIT
BATTERY
CAR STEREO HEAD UNIT
GROUND
To +12V DC
To +12V DC
GROUND