6 each
3
⁄
8
– 16 x 1
1
⁄
2
”
hex bolt
6 each
3
⁄
8
”
flat washer
6 each
3
⁄
8
”
lock washer
6 each
3
/
8
– 16
hex nut
2 each
3
⁄
8
– 24 x 1”
hex bolt
(Delta Unisaw)
4 each
5
⁄
16
– 18 x 1
1
⁄
2
”
hex bolt
4 each
5
⁄
16
”
flat washer
4 each
5
⁄
16
”
lock washer
4 each
5
⁄
16
– 18
hex nut
Before using the INCRA TS-LS, read and follow all
of the instructions and safety information in this
manual.
When using the INCRA TS-LS in conjunction with
any other tool, first read and follow all instructions
and safety information in that tool’s owner’s manual.
Never let any part of the INCRA TS-LS interfere
with another tool’s safety guards or other safety
equipment.
Before using your INCRA TS-LS, make sure all
mounting screws are tight and that the black
clamping knobs are securely tightened to the rails.
Always turn off the power and make sure that the
blade is fully stationary before changing the setting
on any part of the INCRA TS-LS.
Always keep both hands behind the fence when
moving the INCRA TS-LS to a new setting.
Before making a cut, always make sure that the
carriage clamp is fully engaged and that the
rail hook thumbscrew is securely tightened.
Use appropriate safety devices. Keep hands clear
of the saw blade! Always use a push stick, rubber
soled push block, or other safety devices to keep
your hands safely away from the saw blade.
Never let the saw blade come into contact with
any part of the INCRA TS-LS or LS Positioner.
Wear safety glasses, hearing protection, and follow
all normal shop safety practices.
Never operate your table saw without a blade guard.
SAFETY
FASTEnERS
(ACTUAL SIZE)
Mounting Bracket Hardware Pack B-01
Note
:
Extra hardware is provided in this pack to
ensure compatibility with a wide variety of
table saws. Only four of the bolts will be
used in a typical installation.
Important safety instructions for using the INCRA TS-LS
2
INCRA Woodworking Tools & Precision Rules
