Inclusive Technology it-Control, Быстрый старт

Страница: 3 / 8

Pairing it-Control with a transmitter (e.g. it-Switch)
1. Place the it-Control close to the transmitter device.
2. Press and release the PAIR button on the front of the it-
Control. The red light next to it will begin flashing.
3. Within 10 seconds press and release the PAIR button on the
transmitter.
4. The light on the it-Control will continue to flash while the
devices communicate with each other.
5. Once the pairing is successful the red light on the it-Control
will stay on for 5 seconds.
6. If the light continues to flash for 30 seconds and then stops,
repeat the process above. If it still does not pair successfully,
refer to the troubleshooting section.
Pairing information is retained in the it-Control’s memory even
after changing the batteries.