Update firmware
The internal program (firmware)
of AMAneo BTi can be updated for
future improvements. The update
should only be done by technically
experienced people!
Firmware updates will be made
available as a file on the website
www.csslabs.de
in the download
area, if necessary.
To update firmware download the
file from the download area of the
CSS website. Copy the file to a USB
stick into the main directory.
Plug the USB stick into the USB
port
(9)
of AMAneo BTi. Press the
reset button
(2)
on the rear
side of the housing (press with a
paper clip into the small hole) and
the minus key
(4)
at the same
time
. The update starts and lasts
as long as the LED
(6)
flashes red.
Please do not remove the USB
stick during the process.
If the LED
(6)
flashes green again,
the update is finished. Disconnect
the USB stick again. AMAneo BTi is
now ready for use
.
Technical Specification
• UK power supply.
• Integrated Lipo battery, 1250
mAh, operating time up to 20
hours.
• 2x switch inputs (3.5 mm - 1/4
inch jack plug).
• Micro USB port (for battery
charging).
• USB A port for connection of
assistive/ergonomic mouse, max.
250 mA.
• Dimensions: 74mm x 74mm x
26mm.
• Does not require an App, you can
use it instantly.
• Prerequisites: iPhone 5s or later,
iPad 5 or later, iPad mini 2 or
later. We recommend the latest
available iOS.
Support and Information
10
www.inclusive.co.uk/
amaneo-bti
