Pa
ge
4
2.4.
Camera video connection
Pin-assignment quadlock connector / CAB-TVAS40
No liability for vehicle wire colors and pin definition! Possible changes by the vehicle
manufacturer. The given information must be verified by the installer.
2.5.
Coding of rear-view camera
Press button “menu” while in main menu of the CCC for 5 seconds to code the navigation to
rear-view camera.
2.5.1.
Reversing the coding of rear-view camera
The above described coding of rear-view camera can be reversed by pressing the button
“menu” for 5 seconds while in main menu of the CCC.
2.6.
Picture settings
For an acceptable display of the rear-view camera video the PDC function (optical) must be
set to OFF and camera function set to ON in the submenu of the CCC.
(Menu: Settings > Vehicle tires > Shunting Help > Image combinations)
3. Mode of operation
After engaging the reverse gear the rear-view camera will be displayed on the monitor
automatically. It remains on display until the vehicle reaches a speed of 20km / h. The rear
view camera can also be switched on or off manually by the PDC button. Even if the video of
the rear-view camera is visible, the acoustic warning signals of the factory parking sensors
are active.
Assignment
Pin number
●
Red (Video signal)
Pin 4 (Chamber A)
●
Black (Video ground)
Pin 2 (Chamber A)
