InCarTec ICT-A500B, Руководство пользователя

Страница: 4 / 7

Wire Diagram
1* In some cases the Auto-Turn-On function will not work. If you have this
problem, please use the wire “ACC-IN” and connect it to ACC/Amp Remote of
the car stereo or another cable which will p12 V only when the car stereo
is turned on.
2* REM-Out: Connect this wire to the remote input of a separate amplifier if
required.
HIGH LEVEL INPUT
Run the provided Y-ISO connector cable (or the optional car- specific cable) from
the car stereo to the amp. With this type of connection this DSP amplifier gets
the speaker signal from the head unit. Then connect the DSP amplifier to the
battery, it will then be switched on and off automatically when the head unit is
switched on and off.
LINE OUT
DSP- controlled audio signal to external amplifiers.
REM OUTPUT TERMINAL
Terminal to connect the remote-wire with the REM-Input of an amplifier. The DSP
Amplifier turns then on/off the amplifier automatically.
GND P OWER INP UT TERM INAL
Terminal to connect the amplifier to the chassis ground or negative pole of the car
battery.
BATT + PO WER INPUT TERMINAL
Terminal to connect the amplifier to the positive +12V pole of the car battery.
1 2 3 4 5 6 7 8 9 10
11 12 13 14 15 16 17 18 19 20