DASH DISASSEMBLY
KIT PREPARATION
1.
Unclip and remove the factory radio trim
panel including the a/c vents. (Figure A)
2.
Remove (4) Phillips screws securing the
radio. Slide the radio out, then unplug
and remove the radio. (Figure B)
Continue to Kit Preparation
1.
Cut the marked area in the dash cavity.
(Figure A)
2.
Remove (1) 10mm nut holding the area
previously cut in step 1 to remove the
cut-out area.
3.
Snap the
radio trim panel
into the factory
trim bezel from the back side of the bezel.
Continue to Kit Assembly
(Figure B)
(Figure A)
(Figure A)
