2. Preparing for Use
Powering and Charging
Contact the charging terminal on the back of the device according to the charging dock terminal. If the
charging terminal is correct, the screen lightning icon appears.
*It takes about an hour to fully charge the battery.
Keep in mind when charging batteries
•
If there is any foreign matter between charging terminal 1 (product) and charging terminal 2 (charger), it
may not charge properly. Before charging, make sure that there are no foreign substances such as sweat,
liquid, or dust on the charger and Inbody Band 3.
•
If there is no battery left, the in-body band 3 screen will not turn on immediately when the charger is
connected. Charge the battery for at least a few minutes.
•
Charging the charger by connecting it to your computer, etc. may slow down due to low current.
•
If power is not supplied reliably during charging, the screen may not function properly. In this case, separate
the Inbody Band 3 and the charger.
•
Inbody band 3 may become hot during charging. This is a normal phenomenon and does not affect the life
or function of Inbody Band 3. If the battery temperature rises above a certain level, charging may be stopped
for safety reasons. In this case, remove the Inbody Band 3 and charger to cool off and continue charging.
•
During Inbody Band 3 battery charging, only the current time and remaining battery count are available.
However, you will receive some notifications that need to be checked immediately, such as phone calls.
•
Be careful not to bend the cable on the charger. The cable of the charger may be worn out or broken. If the
cable on the charger is damaged, stop using it.
