inbody BAND 2, Руководство пользователя

Страница: 4 / 16

3
General Precautions
Please observe the following precautionary steps:
The InBody BAND 2 has been tested in a controlled environment and is water and dust-resistant under
specific conditions. It satisfies the requirement for IP68 level of international standard IEC 60529 – Degrees
of Protection provided by Enclosures [IP Code]. However, the InBody BAND 2 InBody BAND 2 may not resist
water and may be damaged by water in certain circumstances.
Do not disassemble or cause impact to the InBody BAND 2 arbitrarily. Such actions may result in electrical
shock or injury, failure, and inaccurate outcomes of the InBody BAND 2, and no further warranty service
may be provided by the manufacturer.
Do not open, disassemble, break, deform, bend, smash, press, or make a hole in the InBody BAND 2.
Do not use the InBody BAND 2 if it is damaged. It could cause a fire, burns, injury and/or electrical shock.
Do not place the InBody BAND 2 in saltwater or chemicals (soapy water).
Do not leave the InBody BAND 2 in a bathtub or hot water.
Do not bend the InBody BAND 2 excessively. It may cause damage to the product.
Do not drop or cause impact the InBody BAND 2. The product can be damaged or deformed, causing
water leakage.
Do not wear the InBody BAND 2 for prolonged periods of time in environments with high temperature
and humidity, such as inside a hot car or spa. The exterior may become deformed, or the product may
break/explode.
The battery life can vary by the degree of use.
Do not cover or wrap the InBody BAND 2 while it is in use or charging, as it may cause a fire.
Users who wear the InBody BAND 2 too tightly and/or with sensitive skin may experience skin reactions.
Skin reactions can occur to users who are exposed to external irritants such as sweat and/or soap, or by
allergens, environmental factors, and/or other factors.
Keep the band clean and dry.
Do not connect the InBody BAND 2 to other equipment by means not specified in the user’s manual.
Keep the electrodes of the InBody BAND 2 away from electroconductive materials. Electrical stimulation
such as static electricity can cause product damage or failure.
Do not check notifications or other data shown in the InBody BAND 2 display when distracted such as
when driving.
Be sure not to bend the charging dock USB cable. Discontinue use if the USB cable is damaged.
Test results may vary depending on physical and environmental conditions.
The InBody BAND 2 has been approved for electromagnetic compatibility home use (Class B) and may
be used in all regions.
Avoid taking measurements in cold weather.
Bluetooth devices may cause electromagnetic interference due to the use of the same frequency range.
In case of medical emergencies or when communication is urgent, get notifications directly from your cellphone.
Do not expose the InBody BAND 2 to ultraviolet (UV) light for prolonged periods of time. The strap may
become discolored or deformed by direct sunlight, water, oil, or cosmetics.