Inbike 528, Инструкция по эксплуатации

Страница: 4 / 5


(CDD) Count-down distance
Press left button 3 seconds to begin count-down distance setting,
Left button adjust the number. Right button confirm. Press the right
button to view CDT.

(CDT) Count-down time
Press left button 3 seconds to begin count-down time setting, Left
button adjust the number. Right button confirm. Press the right
button to view CAL.

(CAL) Consumed calorie
The calorie consumed in cycling. Press left button 3 seconds to delete
the date.

(FAT) Consumed Fat
The fat consumed in cycling. Press left button 3 seconds to delete
the date.

(TEM) Temperature
Current temperature, Press left button 3 seconds to change the unit.
(C
°
/ F
°
)Press right button to enter SCAN mode.

(SCAN) Automatic Cycleplay
Screen will shows DST, MXS ,AVS ,TM successively. Press right button
to end the SCAN and enter Clock mode.

Power saving mode
If there is no input within 300 seconds. The screen will turn off.(show
the clock only). The screen will turn on when receive any input or
cycling signal.

Cycling date sampling
Press left button at any mode, the computer will enter cycling date sampling. The bottom
of the screen will show flickering cycling time(TM ), press right button to view sampled
cycling distance(DST) ,cycling time(TM ), cycling average speed (AVS), Maximum speed
(MXS).
Press left button again to quit sampling.