M O D E L
/
I W C D 4 6 . 1
W W W . I N A L T O . H O U S E
Q U I C K S T A R T G U I D E
INSTALL ATION
The appliance is designed to be built-in,
recessed or free standing installation.
The minimum space required is:
830H x 615W x 605D (mm)
For a complete guide, refer to user manual,
page 10.
SUPPORT
Telephone: 1300 11 4357
Email: [email protected]
DETAIL S
Size (mm):
820—880H x 595W x 575D
Congratulations on your new
InAlto Dual Zone Wine Centre!
THE CONTROL S
Your Wine Cellar Centre Controls
1
Power Button
Press and hold the power button for 6
seconds to switch the beverage centre on
and off.
3
Upper Zone “+” Button
Press to increase the set temperature shown
on the display.
4
Upper Zone “-” Button
Press to decrease the set temperature
shown on the display.
3
Lower Zone “+” Button
Press to increase the set temperature shown on
the display.
4
Lower Zone “-” Button
Press to decrease the set temperature
shown on the display.
6
Light Button
Press to turn the internal light on and off.
For a complete guide, refer to user manual,
page 9.
24
It is recommended that you remove all the internal and external
packaging and clean the interior of the appliance prior to first use. We
recommend you wipe all parts with warm water then rise and dry.
Place all parts back into the appliance after cleaning.
Cleaning and user maintenance shall not be made by children
without supervision.
-
Only store wine in sealed containers.
-
Do not overload the cabinet.
-
Only open the door when necessary.
-
This is a self-defrosting appliance. The compressor will not run during
the twenty minutes defrost cycle.
-
Do not pull the shelves beyond the anti-stop position when fully loaded.
-
This appliance is intended to be used exclusively for the storage of wine.
-
In the event of a power failure leave the door closed as much as possible
to maintain the internal working temperature. Should the power failure
continue for a prolonged period you should take steps to protect the
contents of the wine cooler against a rise in temperature. The wine
cooler will remember the selected temperature setting and revert to
these setting once the power is restored.
Opening the door for long periods of time can cause a significant increase
in the temperature in the compartments of the appliance.
4
The wine cooler is designed to defrost automatically every 4 hours. The defrost process will last for 20 minutes.
During defrost, the compressor stops working and fan keeps on running for 20 minutes.
The wine cooler is equipped with an alarm that will sound if the door is left open for more than 60 seconds. Close door
or press any key once to switch off the alarm.
o
o
It is recommended that you install appliance in a place where the ambient temperature is between 16 C - 32 C. If the
ambient temperature is above or below recommended temperature, the performance of the unit may be affected. For
example, placing your unit in extremely cold or hot conditions may cause interior temperatures to fluctuate. The
operation temperature range may not be reached.
To switch the power on/off
Press and hold the power button for 6 seconds to switch the wine cooler on.
Press and hold the power button for 6 seconds again to switch the wine cooler off.
To change the temperature
Continue to press the “+” or “-” buttons for the appropriate zone until the required temperature is shown on the display.
o
o
The preset temperature is 8C/46F for the upper zone and 12 C/54 F for lower zone.
To change the temperature display from Fahrenheit to Celsius, or Celsius to Fahrenheit, press lower zone “+” and “-”
button at the same time for 2 seconds. Tips, please see the “ ” symbol on control panel.
The display shows the current internal temperature when the wine cooler is on.
Optimal temperature selection
o
Whilst wine is best stored at temperatures between 13 and 15 C , your wine can also be stored at drinking temperature.
o
o
As a guide for red wine this is between 15 and 17 C, and for white wine between 12 and 13 C.
To use the internal light
Press the light button to switch the light on or off.
To turn the light ON when door opens, press the light button for 6 seconds, the display with show ‘OP_’ which means
door controls function is ON
To turn the light function OFF, press the light button for 6 seconds, the display will show ‘CL’, which means the door
control function is OFF.
To lock the whole panel
Press power button and “+” button at the same time for one second, all the buttons on panel will be locked.
Press power button and “+” button once again, all the buttons will be unlocked.
Tips, please see the “ ” symbol on control panel.
8 12
1
2
3
4
5
6
Key:
1 - Power button
2 - Upper zone
“+” button
3 - Upper zone
“-” button
4 - Lower zone
“+” button
5 - Lower zone
“-” button
6 - Light button
Defrosting
Door alarm
Controls
Upper zone display
Lower zone display
9
Installation of your appliance
The appliance is designed for built-in, recessed or free standing
installation. The minimum space required is :
615mm W x 605mm D X 830mm H ( refer to right photo)
IMPORTANT: Failure to follow the instructions regarding installation
and ventilation may void the warranty supplied with your
appliance.
615
610
83
0-
89
0
595
575
82
0~
88
0
90
30
10mm
30mm
Installing the stainless steel handle
Door seal
Installing your Wine Cellar
wine cellar
To install the handle, follow the instructions below:
1.
Peel back door seal along the right hand side
of door. You will find a screw hole at the top
and lower of the door where you have
peeled the seal back. (please refer to
the diagram)
2. Take out the screws and spacers from
bag at back of cabinet. Place the
spacers onto screws and then put
the screws in the hole where the
handle is to be installed. Please make
sure the spacer is correctly in place
before you put the screws in the hole.
3. Align the handle with screws,
tighten the screws using a screw
driver until the handle is both flush
and secured tightly against the
door side. (DO NOT over-tighten as
this may cause damage to the door
surface)
4. After handle fixed well, put the door
seal back to the door to cover the
hole.
6
Normal Height
After Adjust
This appliance comes with height adjustable feet which allows the appliance to be installed under bench and ensures
the appliance is stable and level. Just screw the bottom feet anticlockwise to raise the height up to 880mm or clockwise
to lower the height to 820mm. See below photos.
Adjustable feet
Levelling feet
The appliance must be installed level in order to work properly. If the unit is not level, the doors and magnetic seal
alignments will not be covered properly.
To level the unit, adjust one or both levelling feet at the base of the unit.
82
0
88
0
7
