Inalto IO90XL10T, Руководство пользователя

Страница: 16 / 24

15
5.6 Changing the light bulb
CAUTION!
• WARNING: Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of
electric shock.
• Wear protective gloves to change the light bulb.
• To make the replacement, proceed as follows:
• Disconnect the power supply from the power socket or switch off the circuit breaker of the unit's power
socket.
• Unscrew the glass lamp cover anticlockwise (note that it might be stiff) and change the light bulb with a
new one of the same type.
• Screw the glass lamp cover back into place.
• NOTE: Use only halogen lamps 25-40 W / 220 V-240 V, T300°C.
5.7 Disassembly of convection motor.
WARNING: Turn off the electrical power supply to the
appliance prior to servicing it. Failure to disconnect the power
supply during service may result in an electrical shock or fire
hazard.
Step 1: Use a screwdriver to remove the screws on the back
of the cavity inside to disassemble the convection motor
cover, and then pull it out from the clipping hole.
Step 2: To reassemble the convection motor cover, perform
the operations described above in reverse
6. TROUBLESHOOTING
CAUTION!
Refer to the chapters on safety.
11.1 What to do if...
Problem Cause Possible Solution
The oven fails to heat. The oven is off. Switch on the oven.
The oven fails to heat. The end of cooking is on position "0" Position the End of Cooking on manual
The oven fails to heat. You have not selected the required settings. Check that all the settings are correct.
&/,33,1*
6&5(:
16
7. CLEANING AND CARE
7.1 Energy saving
The appliance is equipped with features to help you save energy during everyday cooking.
General tips
•
Ensure that the oven door is closed properly when the appliance is in operation and keep it closed as
much as possible during cooking.
• Use metal plates to improve energy efficiency.
• If possible, place the food in the oven without heating it.
• When cooking longer than 30 minutes, reduce the oven temperature to the minimum for 3 - 10 minutes,
depending on the cooking time. Cooking will continue due to the residual heat in the oven.
• Use the residual heat to warm up other foods.
• Cooking with fan
• If possible, use the cooking functions that include the fan to save energy.
• Keeping food hot
• If you want to use the residual heat to keep a dish hot, choose the lowest temperature setting possible.
8. INSTALLATION
Important: installation must be done in compliance with the standards and in accordance with the regulations
in force. It must be performed by skilled personnel only.
CHARACTERISTIC FEATURES OF THE CABINET
-
For flush-mounted cabinets, the components (plastic or veneered wood) must be held together by
heat-resistant adhesives (with at least 100°C); unsuitable materials and adhesives can cause buckling
and ungluing.
- The cabinet must permit the free passage of the electrical wiring and must be strong enough to bear the
weight of the appliance.
- The oven must be mounted in a secure manner in the envisaged recess, it can be inserted into a column
cabinet or under the top of a modular cabinet, while still providing adequate ventilation.
ASSEMBLY INSTRUCTIONS
1)
Insert the appliance into the compartment
2) Fix the body to the cabinet with the 2 screws provided using the holes in the upper profile
(right and left).
INSTALLATION
Correct disposal of this product
This symbol on the product, or in its packaging, indicates that this product may not be
treated as household waste. Instead, it should be taken to the appropriate waste
collection point for the recycling of electrical and electronic equipment.By ensuring this
product is disposed of correctly, you will help prevent potential negative consequences for
the environment and human health, which could othenwise be caused by the
inappropriate waste handling of this product. For more detailed information about the
recycling of this product, please contact your local council. your household waste disposal
servise, or the shop where you purchased the product.