Inalto IE62T, Руководство пользователя, Страница: 9 / 20

PAGE 09
► The appliance must be wired into a 30A double pole switched fused spur outlet, having 3mm contact separation and
placed in an easily accessible position adjacent to the appliance. It should not be located above the appliance and no
more that 1.25m away from it.
► The spur outlet must still be accessible even when your cooktop is located in its operating position.
► Cable type: H05 VVF 3 core x 4mm2
CONNECTING THE MAINS SUPPLY CABLE
► The mains terminal block is located on the underside of the cooktop and the terminals are accessible by removing the
terminal block cover. This is done by depressing the front of the cover and releasing it from the securing clips.
► The cable connections must be in accordance with the diagram located on the bottom of the cooktop (see below). The
links must also be positioned as indicated.
► You should use a good quality screwdriver to carefully, fully tighten ALL of the terminal screws.
► If when the cooktop is first switched on, only two of the zones work, you should recheck that the terminal screws are
all fully tightened and the links are in position. This should be done before contacting the Customer Care Department.
IMPORTANT! The cooktop must NOT be connected to the mains supply by means of a 10A or 15A plug and socket.
► The cable can be looped if necessary, but make sure that is not kinked or trapped when the cooktop is in position. Care
must be taken to avoid the cable being in contact with hot parts of the appliance.