3
Features
1. High grade stainless steel tank
2. Long life copper tube heating element
3. Thermostat & thermal cut out for safety
4. Fusible plug & BPRVfor total safety
Important Instructions
Please read operating instructions before using the appliance to ensure
safe and reliable performance.
Do's
1. Before plugging in the socket ensure that the mains voltage complies
with the rated one.
2. The gate valve at the inlet shall be kept open.
3. Make sure that no other appliance(s) is (are) plugged into the same
circuit with heater, as this may overload the circuit.
4. If the main cord of the heater is damaged, authorized service personnel
must only replace it.
Don'ts
1. Do not switch ON the heater till it is completely filled with water.
2. Do not install a pressure reducer valve at the inlet.
3. Safety devices are pre-set and sensitive. Do not temper with them. This
could be hazardous.
5. Do not use outdoors. This product is for household use only.
6. In case of any abnormality during operation, immediately switch OFF
the main power supply and contact the nearest service center.
How to Install
1. Installation shall be done by a qualified plumber / electrician.
2. There should be enough space around the heater for easy installation and
servicing.
3. Make sure that the supporting walls or fixtures are strong enough to
carry the weight of the heater when it is completely filled with water.
4. Fix the water heater in perfectly straight position at a suitable height
from the floor.
5. There should be a minimum space of 50 cm between the heater unit and
roof. This is to ensure that heater can be removed easily when required.
6. The heater should be saved from being damaged by splashing water. For
this keep a minimum distance of 1.8 m between the floor and bottom of
the heater.
