4
2. Open the lid and pour in water of desired quantity. While doing so, watch the water level
mark inside the kettle. Never go below the minimum (0.5L) or above the maximum
(MAX.) mark.
3. Close the lid and ensure that the kettle is switched OFF before setting it on the base. The
kettle has a 360
°
cordless control. It can be placed on the connector base at any position
within the circle.
4. Turn the switch to 'I' position, the appliance will begin to operate, and the indicator light will
come ON.
5. When the water boils the appliance will shut off power automatically and the indicator light
will go OFF.
6. If you wish to stop the boiling process or interrupt it temporarily turn the switch to 'O'
position.
7. When the water boils the temperature control mechanism operates to stop the boiling
operation. The boiling operation can be started again by pressing the operating lever after
40-50 seconds. During the appliance cool down do not press the operating lever or the
appliance will be damaged.
8. Adjust the temperature control knob according to the marking around the knob to heat the
water to a desired temperature. After achieving selected temperature, the kettle will
automatically switch off.
9. Unplug the kettle from the socket when not in use.
Safety features
360 degree cordless
The kettle is fitted with 360
°
cordless system. It means that the kettle can rotate
on its
base as per your convenience and move the handle to your desired direction.
Strix control
Strix control is a patented device from Strix UK and is incorporated with highest safety
standards. It helps in better functioning & improves the performance of the kettle.
Variable thermostat
The kettle is designed with "variable temperature control" system which can be
conveniently used to heat water at desired temperature .
Boil dry protection
The kettle is incorporated with "automatic steam switch off " and "boil dry protection". In
case you switch 'ON' the kettle with too little water, auto shut off device will automatically
operate within 10-15 seconds after whole water is evaporated and kettle is switched OFF.
Let the kettle cool down before refilling and then press the button to start the boiling process
again. If you find drops of water under the kettle, do not worry as it is just condensation.
360
°
Содержание Mist
Страница 1: ...ELECTRIC KETTLE Instruction Manual ...
