in.tune Aeware 3, Руководство пользователя

Страница: 26 / 40

24
in.tune instructions
25
in.tune instructions installation & connections
Wiring
Yellow wire (w/fuse)
Connect this wire to a constant
+12 volt power source (a power
source that is not controlled by
the ignition key).
Red wire
Connect this wire to a switched
+12 volt power source (a power
source turned on and off by the
ignition key).
Orange wire
Connect this wire to the
light control switch (dimmer
control). If no lighting circuit is
available, tape off the end of
this wire to prevent shorting out
of the unit.
Blue wire
Connect this wire to the (+)
power antenna activation cir-
cuit. If no power antenna exists,
tape off the end of this wire to
prevent shorting out of the unit.
Black wire
Connect this wire to the frame
of the vehicle (ground or
ground power source). This
wire is the chassis grounding
wire for the unit.
White wire
Connect this wire to the left
front speaker (+) positive
terminal or wire.
White wire with black stripe
Connect this wire to the left
front speaker (-) negative
terminal or wire.
Gray wire
Connect this wire to the right
front speaker (+) positive
terminal or wire.
Gray wire with black stripe
Connect this wire to the right
front speaker (-) negative
terminal or wire.
Green wire
Connect this wire to the left rear
speaker (+) positive terminal
or wire.
Green wire with black stripe
Connect this wire to the left rear
speaker (-) negative terminal
or wire.
Purple wire
Connect this wire to the
right rear speaker (+) positive
terminal or wire.
Purple wire with black stripe
Connect this wire to the
right rear speaker (-) negative
terminal or wire.
Gray cable with red/white RCA
connectors
Connect to the audio line
output of any additional audio
or video sound source.
Black cable with red/white
RCA connectors
Provides L/R channel (front/
rear) audio signal output to an
additional amplifier.