In the Garage AG – Zumikerstrasse 24, Zollikon 8702 Switzerland
3 / 3
7.
Fully close the zipper
8.
Snap on the corresponding plug adaptor for your region onto the
AC Adaptor
9.
Plug the
AC Adaptor
in an appropriate electrical power socket. The Car/Bike Shield will begin to rise.
For the Outdoor version, you need to install the
Fan Cover Support
inside the hood above the fans.
Note: you may need to assist the device by lifting the clear plastic during inflation to ensure a
smooth rise
10.
Once inflated, from the outside of the Car/Bike Shield, place the
Filter
in the round opening by
gently bending the edges to make it fit. There is a specially-made slit in between the inside and
outside panels
Tip: It is easier if you rotate the filter while installing
