Distribué par / Distribuito da / Distributed by / Vertrieben von NETELEC SRL FR - rue Philemon Laugier - 83400 Hyeres les Palmiers
Always unplug your appliance before cleaning and if it is defective.
Never immerse the device in water. It is not suitable for underwater use. Risk of electrocution!
Do not operate the appliance if it has fallen into the water and the plug or appliance is damaged.
Make sure that neither the power cable nor the appliance is placed on hot surfaces or near sources of
heat. Lay the power cable so that it does not come into contact with hot or sharp objects. Risk of electric
shock !
Although the power cable is sturdy, it should never be bent as this can cause cable breakage. Risk of
electric shock !
Never try to open the device with metal objects. This voids your warranty and carries a risk of electric
shock!
Electrical devices are not toys! Use and store the device out of the reach of children. Never let the power
cable hang so that it can not be pulled.
Repairs can only be done by professionals. Devices that have not been professionally repaired pose a
risk to the user.
Only connect the device to an outlet with the correct power supply voltage.
• Use the appliance only on stable surfaces.
• Never use the device if the power cable is damaged. Contact a specialist to see if the cable is
serviceable.
• Only use components and accessories recommended by the manufacturer and designed for this
purpose.
• Before plugging in the appliance, always make sure that the plug, the power cable and your hands are
dry.
• Unplug your appliance before cleaning.
• Do not use abrasive cleaners for cleaning.
• Never immerse the device in water.
8. INITIAL VERIFICATION / DEFECTS AND RESOLUTION
• After unpacking the appliance, check that it is not broken or damaged.
If in doubt, do not use your device, but rather contact your dealer.
• The device is supplied in a packaging for protection.
- Remove the appliance from all its packaging.
- Clean the device and all accessories of the packaging residues.
• Unscrew the power cable completely.
• Place the device in a suitable place on the mounting bracket.
• Or place the device on a bracket recommended by the manufacturer and suitable for this purpose.
Make sure the bracket is attached to a stable, secure surface.
• Make sure that the length of the power cable is sufficient to power the device.
• Insert the power cable into an appropriate outlet.
