in digital DVB-C8080AL, Руководство по эксплуатации

Страница: 9 / 16

CONNECTION
»
connect the audio and video output terminals with the corresponding input
terminal on a TV set
»
Insert the digital antenna cable into the [CABLE IN] terminal on the rear panel,
please notice that the connection effect should effectual
» The [CABLE OUT] loop out terminal can form the loop connection with another
receiver , can also be linked with the RF IN input on a TV set to provide RF signal.
» Don't bundle the antenna cable with a power cord in case cause interference
» The termin a l [CO A XIAL] can connect with a co a xial input on an amplifier
TYPICAL
CONNECTION
VIDEO AUDIO
SIGNAL
1.Insert the digital antenna cable
into the [CABLE IN] terminal on the
rear panel of the receiver
2. Connect one end of yellow
terminal on a RCA cable to the
VIDEO output on this receiver and
the other end to the VIDEO input
on a TV set
3. Connect one end of red terminal
on a RCA cable to the AUDIO R
output on this receiver and the
other end to the AUDIO R input on
a TV set; Connect one end of white
terminal on a RCA cable to the
AUDIO L output on this receiver
and the other end to the AUDIO L
input on a TV set
3. Plug the connector of power
cord into a socket and turn on the
receiver and TV set.
9